Foaming Milk: A Step-by-Step Instructional

Before we delve into the details, if you are looking for a quick fix without the learning curve, we recommend an automatic frothing device, or if you want to go all out, a fully automatic machine that does it all for you.

Frothing Milk with a Steam Wand

First, you will need something that produces steam, and plenty of it, with a nozzle or tip to deliver the steam to your milk; typically an espresso machine starting at $100 and going up into the thousands. Price isn’t pertinent to this discussion, but note that more powerful equipment will yield the desired results more quickly.

What You'll Need:

• Stainless steel frothing pitcher
• A properly calibrated thermometer
• Cold milk right out of the fridge
• Patience

How to Froth Milk with Steam

Fill your frothing pitcher just below the pour spout with cold milk
Fill your milk pitcher right to the bottom of the spout with cold milk. We recommend storing your frothing pitcher in the fridge, as this will give you more time to work with the milk while frothing. If you’re using a thermometer, fully submerge it into the milk.

Turn on your machine’s steam function and purge the steam wand
When you’re ready to start, turn on your espresso machine and allow it to heat to its normal brewing temperature. You want to ensure that your espresso machine will dispense not only ample steam to froth your milk, but also the right kind of steam. Wet steam adds unwanted water to your milk, making it less sweet and harder to froth. To get the dry steam, you need to purge any residual water from the steam wand. When you turn on your espresso machine’s steam mode (for machines that do not have always-on steam), wait about 5 seconds and then open the steam valve briefly into an empty container until the water turns to steam. Wait 20-40 seconds for the boiler to heat up just below steam temperature and purge again. You now have dry steam!

Place the steam wand just below the surface of the milk To keep the steam coming throughout the process, you need to begin frothing your milk before the heat turns off. If your machine is a heat exchanger or other kind with always available steam, this will not be a concern for you.

Open the steam valve to full blast With the steam wand in place and dry steam at the ready, turn your steam to full blast and begin frothing. During the frothing process, you need to keep the tip just below the surface of the milk so that you occasionally hear a ripping, sucking sound. You will also need to have the tip in the correct horizontal position. If your steam tip has one hole, keep it to off-center and at an angle to swirl the milk; if it has 3 or 4 holes, keep it in the center and pointed straight down. When done correctly, your milk will create a vortex that incorporates larger air bubbles into the milk until a velvety smooth microfoam is achieved.

Expand the milk 100°F - 115°F As you incorporate more air into the milk, you will notice its volume increase. This process is called stretching and is why you don’t fill your pitcher full of milk. Take note of the type of bubbles you see; if they are big and stay big, move the wand tip a little lower into the milk. Remember to keep that vortex whirling around as you go. Continue to stretch the milk until the temperature reaches around 100° to 115°F. If you’re not using a milk thermometer, a good way to estimate this temperature is by feeling when the sides of the pitcher start to get warm.

Lower steam wand and emulsify up to 160°F At this point, you can lower the wand tip below the surface of your milk. Make sure the angle and position of the wand stay the same to keep the milk rolling in a vortex. Heat the milk all the way up to a maximum temperature of 160°F. You don’t have to hit 160° precisely, but you don’t want to go over that mark because you will scald the milk and destroy all that yummy froth you just made. If you don’t have a thermometer, you’ll know you’ve reached a good temperature when the pitcher starts to become uncomfortable to touch but not scalding hot.

Frothing Milk with a Froth Assisted Tip

To identify that you have a froth assisted tip, simply look for either some sort of contraption at the end of the wand or what looks to be a misplaced hole on the side of the tip. This is the air-intake hole, and steam should not come out of it. The purpose of this hole is to inject additional air into your milk to compensate for the reduced steam power that some smaller or fully automatic espresso machines possess. Every brand has its own specially trademarked name for it like Pannarello or Cappuccinador. In general, you will still want to place the tip in the milk in the same manner as directed above, but there are exceptions depending on the style of tip. If that breather hole is located closer to the end of the wand (usually a half inch or less), you will need to keep that hole just at the surface of the milk/foam as you froth. If you submerge the hole, it can’t breathe. Continue to monitor the temperature as you froth milk using one of these devices. After milk passes the 100° to 115°F mark, you still need to raise the pitcher so as to lower the tip into the milk and end the frothing phase of the process. You will likely have an easier time making your froth with this device and will enjoy more consistent results, but it will typically produce a slightly inferior microfroth. Most things in life involve a trade-off, and in this case, you are trading a steep learning curve for a less artful latte. No big deal in our book. Please don’t lose hope if you cannot successfully pour the froth on your first few attempts. The silver lining is that you’ll enjoy drink after drink of espresso while you develop your skills. Word to the wise: late at night might not be the best time to start drinking your failed attempts. Give us a call at 877-554-8336 (JLHUFFORD), and we’ll be happy to assist, but you must promise to share when you finally nail it!